2025 Yamaha Outboards F70A Base
Exterior Colors:
- Year 2025
- Make Yamaha Outboards
- Model F70A
2025 Yamaha Outboards F70A
Using advanced features and technology to make it extremely light, powerful and quiet the F70 is the ideal outboard for a myriad of lightweight boats and is available in traditional grey or new pearlescent white.
Features may include:
Horsepower-per-Litre- An advanced powerhead design features a single overhead camshaft (SOHC), yet with four valves per cylinder, for maximum power and efficiency. Total intake valve area is increased 17%, while the pistons and valves are up to 10% lighter (when compared to our T60 model), giving it substantially more horsepower-per-litre of engine displacement than competitive outboards, both four stroke and two stroke direct-injected.
- From the specially designed engine block to the two-piece upper case, every ounce of weight savings has been realized for maximum performance without sacrificing durability. Yamaha's new F70 is not only the lightest four stroke 70 horsepower outboard, it's even lighter than competitive two stroke direct-injected outboards.
- All air entering the engine block of Yamaha's new F70 four stroke is routed through a single throttle valve, to ensure the precise amount of air necessary for optimum power and fuel efficiency. It then enters each cylinder through individual long intake tracks, which are 'pulse tuned' to provide air at the precise volume and timing for maximum density and power.
- Four individual compact electronic fuel injectors deliver the exact amount of fuel needed for optimum performance and economy. Controlled by the Engine Control Module via input from an array of on-engine sensors, their location just above the intake valves enhances fuel atomization, resulting in more efficient combustion.
- Yamaha's F70 provides outstanding hole shot and acceleration thanks in part to an advanced sensor that allows maximum safe ignition timing and a gearcase featuring a high 2.33:1 gear ratio, with specially hardened pinion, forward, and reverse gears for increased durability.
Engine
Engine Type
Four stroke, 4-cylinder
Induction
SOHC / 16 valve
Displacement
60.8 ci (996cc)
Throttle
5,300-6,300 rpm
Bore
2.56 in (65 mm)
Stroke
2.95 in (75 mm)
Cooling System
Raw water, Thermostatic Control
Ignition
System: TCI Microcomputer
Starter
System: Electric
Exhaust
Through Propeller. Water-cooled, Labyrinth
Lubrication
Wet Sump
Compression Ratio
9.4
Gear Ratio (Primary)
28/12 (2.33:1)
Gear Shifter
F/N/R
Electric
Alternator
Output: 17 Amps
Fuel System
Fuel Type
Recommended: Unleaded Gasoline (Minimum Pump Octane 87)
Fuel System
Multi-point electronic fuel injection
Oil Type
Yamalube 4-M FC-W 10W-30
Dimensions
Length
Shaft: 20"
Capacities
Oil capacity
with filter: 2.1L
Weights
Dry Weight
253 lbs (115 kg)
Features
Features
Degree Of Trim/Tilt: -4° through +16°/65° w/PTT